NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV110 10:1 Worm Reducer B5 28mm Input Shaft Compatible with 100 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV110 10:1 Worm Reducer B5 28mm Input Shaft Compatible with 100 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
Hankemotor

NMRV110 10:1 Worm Gearbox – B5 Flange, IEC 100, 28mm Input

$861.10 In Stock Sold out
Add to wishlist Added to wishlist

1-7 DAYS DELIVERY

100% ORIGINAL AND QUALITY

12 MONTHS GUARANTEE

  • Description
NMRV110 10:1 worm gearbox: 10:1 reduction, B5 input flange for an IEC 100 frame motor with a 28 mm shaft, 42 mm hollow output. From a 4-pole 1400 rpm motor the output turns at about 140 rpm. Stocked in Glen Waverley, Victoria.

What 10:1 does to your motor speed

10:1 roughly divides the motor speed by 10. Handy for chain or belt-driven conveyors that need a modest slow-down and a right-angle turn in the drive.

Output, 4-pole motor about 140 rpm With a 6-pole motor (960 rpm) about 96 rpm

These are nominal figures (motor speed / 10); actual speed depends on load.

If 140 rpm is not quite right, 15:1 slows it to about 93 rpm. Also in stock: 20:1, 25:1, 30:1, 40:1, 50:1.

Fitting the motor

Before buying, hold a tape to your motor flange. For IEC 100 B5 you should see about 250 mm overall, a 215 mm bolt circle and a 180 mm spigot. The gearbox bore suits a 28 mm shaft with an 8 mm key.

A foot-mounted (B3) motor will not bolt on as it is. Fit a matching B5 flange first; we stock B5 and B14 motor flanges by frame size.

Other input bores at 10:1: 19 mm (IEC 80), 24 mm (IEC 90), 38 mm (IEC 132).

Need variable speed?

Pair this gearbox with a three-phase motor and a 240 V input VFD to dial the output speed in. Running the motor well below its rated speed for long periods reduces its own cooling, so keep that in mind on continuous duty.

Gearbox data

Model NMRV110-10-100 Ratio 10:1 Input B5 flange, IEC 100 Input bore 28 mm Hollow output bore 42 mm, 12 mm key Weight without motor approx. 41 kg

See the outline dimension sheet in the product photos for mounting-foot and housing dimensions.

Before you install
  • A worm gearbox can resist turning backwards, but it is not a brake. Any lifting or holding job needs a separate brake.
  • Shaft-mounting the gearbox on the driven shaft? Stop the housing rotating with a torque arm (we stock one for size 110).
  • Guard the output and any chain, belt or coupling so nothing can be caught while it turns.

Postage, returns and warranty

Australia-wide delivery from our Glen Waverley store; postage appears at checkout. Our Returns, Refunds & Warranty Policy explains warranty and returns.

Help choosing between ratios: 0401 634 280 or hankemotors@gmail.com.

RECENTLY VIEWED