HankeMotor stocks the Fulinn H1 range — 10 models from 0.75kW to 7.5kW, with a 2-year replacement warranty on every unit. H1 is our compact drive line: DIN-rail mountable, detachable keypad, built-in PID control, and a wider 0–1000Hz output range than our standard BD600 series. Available in single-phase 240V and three-phase 415V input. In stock Glen Waverley, ships Australia-wide.

What Makes H1 Different from BD600?

H1 (this range)

DIN-rail mount, compact enclosure

Detachable keypad, built-in PID

0–1000Hz output range

Best for control panel builds and space-constrained installs

BD600

Standard enclosure, wider power range (to 37kW)

0–600Hz output range

Best for general workshop and industrial use, motor+drive bundles available

Both ranges carry the same 2-year warranty and are factory-configured for Australian 240V/415V supply. See the full BD600 series for higher-power options.

Single-Phase Input Range

240V single-phase in → 240V three-phase out.

0.75kW

10A · $253.70

1.5kW

~12A · $327.00

2.2kW

12.5A · $371.80

3.7kW

$448.00

Three-Phase Input Range

415V three-phase in → 415V three-phase out. No phase conversion — for sites that already have three-phase power.

0.75kW

3.0A · $256.30

1.5kW

4.5A · $313.60

2.2kW

5.6A · $371.80

4kW

10.5A · $492.80

5.5kW

$646.20

7.5kW

19A · $737.30

Exact current draw for each model is listed on its product page.

Buying a single-phase-input drive separately? H1's single-phase models output 240V three-phase. If pairing with a motor you already own, check it's dual-rated 415V(Y)/240V(△) and reconnect it in delta at the terminal box — a standard 415V-only motor will not run at full power on 240V three-phase output.

Sizing & Safety Basics

Single-phase input drives need extra headroom: single-phase input draws roughly double the equivalent three-phase current at the same motor load — size up for continuous-duty loads like compressors and conveyors.

Capacitor-run single-phase motors cannot use a VFD: if your motor has start/run capacitors (most workshop compressor and pool pump motors), it needs a three-phase induction motor paired with a drive instead.

Need help choosing? Call 0401 634 280 or email hankemotors@gmail.com

Our Glen Waverley team can match you with the right drive for your motor and application.