Fulinn H1 30 kW (40 HP) drive, the largest H1 we stock. 415 V three phase in and out, rated input 62 A, rated output 58 A, frame F6 (25 × 21 × 40 cm). 2-year replacement warranty, dispatched from Glen Waverley, VIC.
For the biggest motors in the shed
Large compressors, ventilation fans, process pumps and heavy conveyors often use 30 kW motors. The drive reduces the starting current, gives smooth acceleration and lets you run at the speed the process needs rather than full speed all day.
Specifications
Motor power
30 kW / 40 HP
Supply
Three phase 415 V
Input current
62 A
Output current
58 A
Output frequency
0–1000 Hz
Dimensions
25 × 21 × 40 cm
Current figures from the H1 series table in the manual.
Why a VFD at this size
- Lower inrush current than direct-on-line starting
- Speed matched to demand on fans and pumps
- Controlled stopping with the built-in brake unit and an external resistor
- Motor protection for overload, phase loss and overheating
Installation requirements
- Motor full-load current at or below 58 A.
- Design and installation by a licensed electrician, including supply protection.
- Mount in a switch room or ventilated cabinet within the rated temperature range.
Bigger than 30 kW?
For 37 kW and up, see the BD600 series, which goes to 250 kW. The 22 kW H1 is one size down. Download the H1 detailed manual (PDF).
Delivery and warranty
Delivered Australia-wide from Glen Waverley; the cost is based on your address and shown at checkout. Pick-up can be arranged by phone. Warranty is 2 years, replacement.
Planning a 30 kW install? Talk to us before you order. Call 0401 634 280 or email hankemotors@gmail.com.