Fulinn H1 4 kW (5 HP) VFD, model H100T40040BX0. 415 V three phase in and out, rated output current 10.5 A, frame F2. Built-in PID makes it a good fit for pumps and fans. 2-year replacement warranty, Glen Waverley stock.
Pumps, fans and process control
A 4 kW motor often drives a pressure pump, a ventilation fan or a cooling fan. With the H1 drive and a pressure or flow sensor, the built-in PID loop adjusts motor speed to hold the setpoint. When demand drops the motor slows down instead of running flat out.
It works just as well on machinery: conveyors, mixers and machine tools that need adjustable speed and soft starting.
Ratings
Motor power
4.0 kW / 5 HP
Supply
Three phase 415 V
Input current
12.6 A
Output current
10.5 A
Output frequency
0–1000 Hz
Size (F2)
14 × 10 × 20 cm
Current ratings are from the H1 manual rating table for model H100T40040BX0. Sensor input: 0–10 V or 0–20 mA on the analog terminals.
Setting up PID
- Connect the sensor signal to the analog input
- Enter the setpoint on the keypad or from a second analog signal
- Tune the PID gains in the PID parameter group, as described in the manual
- Use the sleep function settings to stop the pump at low demand where your application allows it
Installation
- Size the motor by current: its full-load amps must not exceed 10.5 A.
- Have a licensed electrician install the drive and supply circuit.
- Earth the drive and the motor; keep motor and signal cables apart.
Next steps
Compare the 2.2 kW and 5.5 kW H1 drives, or view the H1 three phase range. Download the H1 detailed manual (PDF) for the PID and terminal settings.
Delivery and warranty
Delivered across Australia from Glen Waverley, VIC. Shipping is calculated at checkout from your address. Warranty is 2 years with replacement of a faulty unit.
Setting up a constant-pressure pump? We can help with the parameters. Call 0401 634 280 or email hankemotors@gmail.com.