Fulinn H1 0.75 kW (1 HP) drive for 415 V three phase supply, model H100T40007BX0. Three phase in, three phase out, rated output 3.0 A. Compact F1 frame for DIN rail. 2-year replacement warranty, shipped from Glen Waverley, VIC.
For sites that already have 415 V
If your shed or factory has three phase power, this drive sits between the supply and a small 415 V motor so you can set its speed. It suits conveyors, small fans, dosing and circulation pumps, agitators and light machine tools.
Running a fan or pump slower than full speed is often the simplest way to match it to the job, and the drive does it without throttling valves or dampers.
Specifications
Motor power
0.75 kW / 1 HP
Supply
Three phase 415 V, 50/60 Hz
Rated input current
4.0 A
Rated output current
3.0 A
Output frequency
0–1000 Hz
Size
17 × 8.5 × 13 cm (F1)
Input and output current from the H1 rating table in the manual. Overload 150% for 60 s, 180% for 2 s. Start torque 150% at 1 Hz in sensorless vector mode.
Control options
- Keypad on the front, which can be unplugged and mounted remotely
- Run and speed signals from the control terminals, such as a 0–10 V potentiometer or a PLC output
- Built-in PID to hold a pressure or flow from a sensor
- RS485 communication terminals
Before power-up
- Check the motor nameplate: 415 V three phase, full-load current at or below 3.0 A.
- Earth both the drive and the motor.
- Have a licensed electrician connect the supply.
Related drives
Step up to the 1.5 kW or 2.2 kW H1 three phase drives, or browse every size in the H1 three phase range. Matching motors are in the 415 V three phase motor collection. The H1 manual (PDF) has the full parameter list.
Shipping and warranty
Sent Australia-wide from our Glen Waverley warehouse, with postage calculated at checkout. The 2-year replacement warranty is handled by us directly.
Questions about wiring a remote speed pot? Call 0401 634 280 or email hankemotors@gmail.com.