NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV110 10:1 Worm Reducer B5 24mm Input Shaft Compatible with 90 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV110 10:1 Worm Reducer B5 24mm Input Shaft Compatible with 90 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
Hankemotor

NMRV110 10:1 Worm Gearbox – B5 Flange, IEC 90, 24mm Input

$861.10 In Stock Sold out
Add to wishlist Added to wishlist

1-7 DAYS DELIVERY

100% ORIGINAL AND QUALITY

12 MONTHS GUARANTEE

  • Description
Size 110 worm gearbox, 10:1. It bolts onto an IEC 90 B5 flange motor with a 24 mm shaft and brings 1400 rpm down to about 140 rpm at the 42 mm hollow output. Ships from our Glen Waverley warehouse.

What 10:1 does to your motor speed

10:1 roughly divides the motor speed by 10. Handy for chain or belt-driven conveyors that need a modest slow-down and a right-angle turn in the drive.

With a 4-pole motor (1400 rpm) about 140 rpm Output, 6-pole motor about 96 rpm

Calculated from nominal motor speed; allow a few percent less under full load.

With the same 24 mm input, one step slower is 15:1 (about 93 rpm). Full range with this input: 20:1, 25:1, 30:1, 40:1, 50:1, 80:1, 100:1.

Will it bolt onto your motor?

Your motor needs an IEC 90 B5 flange to match: on the NMRV110 drawing that is 200 mm outside, 165 mm between bolt centres across the circle, 130 mm spigot. The bore is 24 mm and takes an 8 mm key.

Have a foot-mount motor? Add a B5 flange for your frame size and it can drive this gearbox.

Other input bores at 10:1: 19 mm (IEC 80), 28 mm (IEC 100), 38 mm (IEC 132).

Fine-tuning the speed

If 140 rpm is close but not exact, run a three-phase motor on a VFD. Lowering the frequency slows the output smoothly without changing gearboxes.

Specifications

Model NMRV110-10-90 Ratio 10:1 Input B5 flange, IEC 90 Input bore 24 mm Hollow output bore 42 mm, 12 mm key Weight without motor approx. 41 kg

Flange, bore and weight figures come from the NMRV110 dimension sheet in the photos above.

Before you install
  • A worm gearbox can resist turning backwards, but it is not a brake. Any lifting or holding job needs a separate brake.
  • For hollow-shaft mounting without feet, add the size 110 torque arm to take the reaction load.
  • Run it for a short time without load first and listen for knocking or grinding before putting it to work.

Delivery

Freight is worked out at checkout and the gearbox leaves from Glen Waverley, VIC. See the Returns, Refunds & Warranty Policy for warranty.

Have a drawing or a photo of the old gearbox? Send it to hankemotors@gmail.com or call 0401 634 280 and we will match it.

RECENTLY VIEWED