NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV110 10:1 Worm Reducer B5 19mm Input Shaft Compatible with 80 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV110 10:1 Worm Reducer B5 19mm Input Shaft Compatible with 80 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
Hankemotor

NMRV110 10:1 Worm Gearbox – B5 Flange, IEC 80, 19mm Input

$861.10 In Stock Sold out
Add to wishlist Added to wishlist

1-7 DAYS DELIVERY

100% ORIGINAL AND QUALITY

12 MONTHS GUARANTEE

  • Description
Size 110 worm gearbox, 10:1. It bolts onto an IEC 80 B5 flange motor with a 19 mm shaft and brings 1400 rpm down to about 140 rpm at the 42 mm hollow output. Stocked in Glen Waverley, Victoria.

Speed you get from a 10:1 ratio

A low ratio like 10:1 keeps the output fairly quick. It suits conveyors, feeders and agitators that need to keep moving rather than crawl.

1400 rpm motor in about 140 rpm With a 6-pole motor (960 rpm) about 96 rpm

Output speed = motor speed ÷ 10. Motors slow slightly under load, so the real output will be a little lower.

If 140 rpm is not quite right, for less speed, 15:1 gives about 93 rpm. Other ratios: 20:1, 25:1, 30:1, 40:1, 50:1.

Motor fit

This gearbox expects an IEC 80 motor with a B5 flange: 200 mm flange, 165 mm pitch circle for the four bolts, 130 mm spigot, 19 mm shaft and 6 mm key. All five come from the dimension sheet for size 110.

Motors with feet only (B3) need a B5 flange fitted before they can drive the gearbox.

If your motor shaft is 11 mm, a keyed shaft sleeve takes it up to 19 mm. The motor flange still has to match the gearbox flange.

Different motor? This ratio also comes with 24 mm (IEC 90), 28 mm (IEC 100), 38 mm (IEC 132) input.

Buying a motor as well?

If you do not have a motor yet, our motor and worm gearbox sets come matched, so there is no flange or shaft size to check.

Key figures

Model NMRV110-10-80 Ratio 10:1 Input B5 flange, IEC 80 Input bore 19 mm Hollow output bore 42 mm, 12 mm key Weight without motor approx. 41 kg

See the outline dimension sheet in the product photos for mounting-foot and housing dimensions.

Safety and fitting
  • A worm gearbox can resist turning backwards, but it is not a brake. Any lifting or holding job needs a separate brake.
  • Run it for a short time without load first and listen for knocking or grinding before putting it to work.
  • Moving shafts, couplings and chains must be guarded before the machine goes into use.

Postage, returns and warranty

Ships Australia-wide from Glen Waverley, VIC; postage is calculated at checkout. Warranty and returns: see our Returns, Refunds & Warranty Policy.

Not sure about ratio or motor size? Call 0401 634 280 or email hankemotors@gmail.com with the speed you need at the output and what the gearbox is driving.

RECENTLY VIEWED