NMRV075 10:1 right-angle worm reducer. Motor side: B5 flange, IEC 80, 19 mm bore. Load side: 28 mm keyed hollow shaft. Output speed is roughly 140 rpm with a 1400 rpm motor. In stock at Glen Waverley, VIC.
Speed you get from a 10:1 ratio
With only 10:1 reduction, most of the motor speed is kept. The worm set runs at its best efficiency here, so it is a good choice for continuous conveyor duty.
With a 4-pole motor (1400 rpm)
about 140 rpm
960 rpm motor in
about 96 rpm
Speeds shown are motor rpm ÷ 10, rounded.
With the same 19 mm input, 15:1 slows it to about 93 rpm and one step faster is 7.5:1 (about 187 rpm). Also in stock: 20:1, 25:1, 30:1, 40:1, 50:1, 60:1, 80:1, 100:1.
Will it bolt onto your motor?
Before buying, hold a tape to your motor flange. For IEC 80 B5 you should see about 200 mm overall, a 165 mm bolt circle and a 130 mm spigot. The gearbox bore suits a 19 mm shaft with a 6 mm key.
A foot-mounted (B3) motor will not bolt on as it is. Fit a matching B5 flange first; we stock B5 and B14 motor flanges by frame size.
A smaller 11 mm motor shaft can be brought up to 19 mm with our shaft sleeve, as long as the flange also matches.
NMRV075 10:1 is also listed with 14 mm (IEC 71), 24 mm (IEC 90), 28 mm (IEC 100) input.
Connecting the load
A hollow output lets you mount the gearbox directly on the machine shaft, which saves a coupling. A smear of anti-seize on the shaft makes it much easier to remove later. Solid output shafts are available if you need one.
Key figures
Model
NMRV075-10-80
Ratio
10:1
Input
B5 flange, IEC 80
Input bore
19 mm
Hollow output bore
28 mm, 8 mm key
Weight without motor
approx. 9 kg
See the outline dimension sheet in the product photos for mounting-foot and housing dimensions.
Good to know
- Line up the key and slide the motor shaft into the input bore by hand. Never hammer it in; the shock goes straight into the bearings.
- Do not rely on the worm to hold a load. For hoists, lifts or anything that could run back under gravity, fit a proper brake.
- Give it a short unloaded test run before the first real job.
Postage, returns and warranty
We post from Glen Waverley to all states, priced at checkout by postcode. Warranty claims are handled by us directly (Returns, Refunds & Warranty Policy).
Tell us what the gearbox will drive and how fast it should turn. Phone 0401 634 280, email hankemotors@gmail.com.