1-7 DAYS DELIVERY
NMRV075 15:1 Worm Gearbox – B5 Flange, IEC 80, 19mm Input
100% ORIGINAL AND QUALITY
12 MONTHS GUARANTEE
- Description
- Description
What 15:1 does to your motor speed
Low reduction (15:1) is mainly about turning the drive through 90 degrees and taking the edge off the motor speed. Think packing-line conveyors, tumblers and rotating screens.
1400 rpm motor in about 93 rpm 960 rpm motor in about 64 rpmNameplate speed divided by the ratio. Under load the motor runs a few percent slower.
Close alternatives on NMRV075: one step slower is 20:1 (about 70 rpm) and one step faster is 10:1 (about 140 rpm). Other ratios: 7.5:1, 25:1, 30:1, 40:1, 50:1, 60:1, 80:1, 100:1.
Motor fit
Your motor needs an IEC 80 B5 flange to match: on the NMRV075 drawing that is 200 mm outside, 165 mm between bolt centres across the circle, 130 mm spigot. The bore is 19 mm and takes a 6 mm key.
A foot-mounted (B3) motor will not bolt on as it is. Fit a matching B5 flange first; we stock B5 and B14 motor flanges by frame size.
If your motor shaft is 11 mm, a keyed shaft sleeve takes it up to 19 mm. The motor flange still has to match the gearbox flange.
Other input bores at 15:1: 14 mm (IEC 71), 24 mm (IEC 90), 28 mm (IEC 112).
Want the motor fitted?
This listing is the gearbox only. For a ready-matched unit, see the geared motor range, or browse all worm gearboxes.
Gearbox data
Model NMRV075-15-80 Ratio 15:1 Input B5 flange, IEC 80 Input bore 19 mm Hollow output bore 28 mm, 8 mm key Weight without motor approx. 9 kgFull dimensions are on the drawing among the product photos.
Installation notes- Do not force the motor shaft in. If it binds, check the key height and clean any burrs off the shaft first.
- Shaft-mounting the gearbox on the driven shaft? Stop the housing rotating with a torque arm (we stock one for size 75).
- Have a licensed electrician connect the motor.
Delivery and warranty
Sent from our Glen Waverley warehouse to any Australian address, with postage shown at checkout. Warranty terms are in our Returns, Refunds & Warranty Policy.
Tell us what the gearbox will drive and how fast it should turn. Phone 0401 634 280, email hankemotors@gmail.com.
