1-7 DAYS DELIVERY
NMRV075 15:1 Worm Gearbox – B5 Flange, IEC 112, 28mm Input
100% ORIGINAL AND QUALITY
12 MONTHS GUARANTEE
- Description
- Description
Is 15:1 the right ratio?
A low ratio like 15:1 keeps the output fairly quick. It suits conveyors, feeders and agitators that need to keep moving rather than crawl.
With a 4-pole motor (1400 rpm) about 93 rpm Output, 6-pole motor about 64 rpmOutput speed = motor speed ÷ 15. Motors slow slightly under load, so the real output will be a little lower.
With the same 28 mm input, for less speed, 20:1 gives about 70 rpm and for more speed, 10:1 gives about 140 rpm. Other ratios: 7.5:1, 25:1, 30:1, 40:1, 50:1, 80:1.
Checking it fits your motor
Check three numbers on your motor flange: outside diameter 250 mm, bolt circle 215 mm, spigot 180 mm. Those are the IEC 112 B5 figures from the NMRV075 drawing. The shaft goes into a 28 mm bore with an 8 mm key.
Have a foot-mount motor? Add a B5 flange for your frame size and it can drive this gearbox.
NMRV075 15:1 is also listed with 14 mm (IEC 71), 19 mm (IEC 80), 24 mm (IEC 90) input.
Need variable speed?
The ratio is fixed, but the motor speed does not have to be. Drive a three-phase motor from a single phase to three phase VFD and you can trim the output above or below 93 rpm from a 240 V supply.
Technical data
Model NMRV075-15-112 Ratio 15:1 Input B5 flange, IEC 112 Input bore 28 mm Hollow output bore 28 mm, 8 mm key Weight without motor approx. 9 kgFull dimensions are on the drawing among the product photos.
Good to know- Line up the key and slide the motor shaft into the input bore by hand. Never hammer it in; the shock goes straight into the bearings.
- Do not rely on the worm to hold a load. For hoists, lifts or anything that could run back under gravity, fit a proper brake.
- Line up the driven shaft carefully. A bent or misaligned shaft loads the output bearings and shortens their life.
Postage, returns and warranty
Sent from our Glen Waverley warehouse to any Australian address, with postage shown at checkout. Warranty terms are in our Returns, Refunds & Warranty Policy.
Tell us what the gearbox will drive and how fast it should turn. Phone 0401 634 280, email hankemotors@gmail.com.
