NMRV075 worm drive with a 10:1 ratio and a B5 input for IEC frame 100 motors. The input bore is 28 mm, the hollow output 28 mm, and the output speed is about 140 rpm from a 4-pole motor. Stocked in Glen Waverley, Victoria.
What 10:1 does to your motor speed
10:1 is at the fast end of the worm gearbox range. Typical jobs are bottle and parcel conveyors, rotating brushes and mixing paddles, where you want the speed brought down a few times, not to a crawl.
With a 4-pole motor (1400 rpm)
about 140 rpm
With a 6-pole motor (960 rpm)
about 96 rpm
Speeds shown are motor rpm ÷ 10, rounded.
With the same 28 mm input, for less speed, 15:1 gives about 93 rpm and for more speed, 7.5:1 gives about 187 rpm. Full range with this input: 20:1, 25:1, 30:1, 40:1, 50:1, 80:1.
Checking it fits your motor
The input takes a B5 (large flange) motor in IEC frame 100. On the dimension sheet for this size, the IEC 100 B5 adapter has a 250 mm flange, four bolts on a 215 mm pitch circle and a 180 mm spigot, with a 28 mm bore and 8 mm key. Measure your motor flange against these before ordering.
A foot-mounted (B3) motor will not bolt on as it is. Fit a matching B5 flange first; we stock B5 and B14 motor flanges by frame size.
Other input bores at 10:1: 14 mm (IEC 71), 19 mm (IEC 80), 24 mm (IEC 90).
Buying a motor as well?
This listing is the gearbox only. For a ready-matched unit, see the geared motor range, or browse all worm gearboxes.
Technical data
Model
NMRV075-10-100
Ratio
10:1
Input
B5 flange, IEC 100
Input bore
28 mm
Hollow output bore
28 mm, 8 mm key
Weight without motor
approx. 9 kg
Flange, bore and weight figures come from the NMRV075 dimension sheet in the photos above.
Safety and fitting
- Motor wiring must be done by a licensed electrician.
- Give it a short unloaded test run before the first real job.
- Guard the output and any chain, belt or coupling so nothing can be caught while it turns.
Postage, returns and warranty
Freight is worked out at checkout and the gearbox leaves from Glen Waverley, VIC. See the Returns, Refunds & Warranty Policy for warranty.
Tell us what the gearbox will drive and how fast it should turn. Phone 0401 634 280, email hankemotors@gmail.com.