NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV075 15:1 Worm Reducer B5 14mm Input Shaft Compatible with 71 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV075 15:1 Worm Reducer B5 14mm Input Shaft Compatible with 71 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
Hankemotor

NMRV075 15:1 Worm Gearbox – B5 Flange, IEC 71, 14mm Input

$553.10 In Stock Sold out
Add to wishlist Added to wishlist
Categories: 15:1 Reduction

1-7 DAYS DELIVERY

100% ORIGINAL AND QUALITY

12 MONTHS GUARANTEE

  • Description
NMRV075 15:1 right-angle worm reducer. Motor side: B5 flange, IEC 71, 14 mm bore. Load side: 28 mm keyed hollow shaft. Output speed is roughly 93 rpm with a 1400 rpm motor. Ships from our Glen Waverley warehouse.

Is 15:1 the right ratio?

At 15:1 the output still runs at a useful pace for belt conveyors, mixers and rollers. Low-ratio worm sets also lose less power as heat than the high ratios.

1400 rpm motor in about 93 rpm 960 rpm motor in about 64 rpm

Worked out as motor rpm divided by 15. Loaded motors slip slightly, so expect a touch less than these figures.

Close alternatives on NMRV075: for less speed, 20:1 gives about 70 rpm and for more speed, 10:1 gives about 140 rpm. Full range with this input: 7.5:1, 25:1, 30:1, 40:1, 50:1.

Motor fit

This gearbox expects an IEC 71 motor with a B5 flange: 160 mm flange, 130 mm pitch circle for the four bolts, 110 mm spigot, 14 mm shaft and 5 mm key. All five come from the dimension sheet for size 75.

A foot-mounted (B3) motor will not bolt on as it is. Fit a matching B5 flange first; we stock B5 and B14 motor flanges by frame size.

If your motor shaft is 11 mm, a keyed shaft sleeve takes it up to 14 mm. The motor flange still has to match the gearbox flange.

NMRV075 15:1 is also listed with 19 mm (IEC 80), 24 mm (IEC 90), 28 mm (IEC 112) input.

Fine-tuning the speed

The ratio is fixed, but the motor speed does not have to be. Drive a three-phase motor from a single phase to three phase VFD and you can trim the output above or below 93 rpm from a 240 V supply.

Technical data

Model NMRV075-15-71 Ratio 15:1 Input B5 flange, IEC 71 Input bore 14 mm Hollow output bore 28 mm, 8 mm key Weight without motor approx. 9 kg

Housing, foot and output flange dimensions for size 75 are on the drawing in the product images.

Before you install
  • A worm gearbox can resist turning backwards, but it is not a brake. Any lifting or holding job needs a separate brake.
  • Give it a short unloaded test run before the first real job.
  • Moving shafts, couplings and chains must be guarded before the machine goes into use.

Shipping and warranty

In stock at Glen Waverley, Victoria, and delivered nationwide. Checkout works out the postage; our Returns, Refunds & Warranty Policy covers claims.

Not sure about ratio or motor size? Call 0401 634 280 or email hankemotors@gmail.com with the speed you need at the output and what the gearbox is driving.

RECENTLY VIEWED