NMRV110 10:1: right-angle drive that slows a motor 10 times. With an IEC 112 B5 motor (28 mm shaft) running at 1400 rpm, you get about 140 rpm on a 42 mm hollow output. In stock at Glen Waverley, VIC.
Output speed and typical uses
Choose a low ratio such as 10:1 when the driven machine still needs to turn at a fair rate: roller tables, small conveyors, fans driven through a right angle, or a paddle in a tank.
Output, 4-pole motor
about 140 rpm
Output, 6-pole motor
about 96 rpm
These are nominal figures (motor speed / 10); actual speed depends on load.
Close alternatives on NMRV110: one step slower is 15:1 (about 93 rpm). Other ratios: 20:1, 25:1, 30:1, 40:1, 50:1.
Fitting the motor
IEC 112 B5 is the interface here. The input flange measures 250 mm with bolts on a 215 mm circle and a 180 mm locating spigot. A 28 mm motor shaft with an 8 mm key slides into the bore.
Have a foot-mount motor? Add a B5 flange for your frame size and it can drive this gearbox.
NMRV110 10:1 is also listed with 19 mm (IEC 80), 24 mm (IEC 90), 38 mm (IEC 132) input.
Adjustable speed
If 140 rpm is close but not exact, run a three-phase motor on a VFD. Lowering the frequency slows the output smoothly without changing gearboxes.
Gearbox data
Model
NMRV110-10-112
Ratio
10:1
Input
B5 flange, IEC 112
Input bore
28 mm
Hollow output bore
42 mm, 12 mm key
Weight without motor
approx. 41 kg
Housing, foot and output flange dimensions for size 110 are on the drawing in the product images.
Before you install
- A worm gearbox can resist turning backwards, but it is not a brake. Any lifting or holding job needs a separate brake.
- Keep the load shaft square to the gearbox; misalignment wears the output seals and bearings.
- Give it a short unloaded test run before the first real job.
Shipping
In stock at Glen Waverley, Victoria, and delivered nationwide. Checkout works out the postage; our Returns, Refunds & Warranty Policy covers claims.
Tell us what the gearbox will drive and how fast it should turn. Phone 0401 634 280, email hankemotors@gmail.com.