50 mm motor pulley in cast iron, single groove, with a 16 mm bore with a 5 mm keyway. Stocked in Victoria.
Mounting
Bore size is 16 mm with a 5 mm keyway. Measure your shaft with calipers; it should read 16 mm. Made for 5/8" (16 mm) shafts.
Grooves, material and speed
One belt is enough for light drives: small pumps, fans, sanders, compressors and workshop machines. Cast iron is heavy and hard-wearing, and its weight helps smooth out the drive.
Pulley speed ratio: driven rpm = motor rpm × (driver diameter ÷ driven diameter). Calculate with pitch diameters rather than outside diameters for the exact result.
Same 16 mm bore, other sizes: 50 mm double, 70 mm single, 70 mm double, 90 mm single, 90 mm double, 100 mm single, 100 mm double, 120 mm single.
Pulley data
Diameter
50 mm
Bore size
16 mm (5/8")
Belt grooves
1 (single)
Keyway width
5 mm
Material
Cast iron
Suits belts
A-section V-belt
Safety and fitting
- Isolate the motor before working on the drive.
- Push the pulley fully home on the shaft before tightening.
- Tension the belt so it deflects slightly when pressed midway; too tight overloads the motor bearings.
- Belts and pulleys must be guarded.
Delivery and warranty
We post from Glen Waverley to all states, priced at checkout by postcode. Warranty claims are handled by us directly (Returns, Refunds & Warranty Policy).
Call 0401 634 280 or email hankemotors@gmail.com and we will help match a pulley to your motor.