120 / 16 mm V pulley (outside diameter / bore), double grooves, cast iron. Stocked in Victoria.
Will it fit your motor?
The 16 mm bore is made to slide onto a 16 mm shaft, driven by a 5 mm key. 16 mm is the metric equivalent of 5/8", a common shaft size on imported and older motors.
Single, double or triple groove?
Two grooves let two belts share the load, so the drive can carry more power with less slip than a single belt. Cast iron holds its shape under belt tension and lasts for years.
A bigger pulley on the motor speeds the machine up; a smaller one slows it down. The speed changes in proportion to the pitch diameters of the two pulleys.
Need a different diameter for a 16 mm shaft? Try 50 mm single, 50 mm double, 70 mm single, 70 mm double, 90 mm single, 90 mm double, 100 mm single, 100 mm double.
Dimensions
Diameter
120 mm
Bore size
16 mm (5/8")
Belt grooves
2 (double)
Key width
5 mm
Made from
Cast iron
Suits belts
A
Good to know
- Isolate the motor before working on the drive.
- Check pulley alignment with a straight edge across both faces.
- Set belt tension firm but not drum-tight.
- Belts and pulleys must be guarded.
Delivery
In stock at Glen Waverley, Victoria, and delivered nationwide. Checkout works out the postage; our Returns, Refunds & Warranty Policy covers claims.
Questions about fit? 0401 634 280 or hankemotors@gmail.com.