1-7 DAYS DELIVERY
NMRV063 15:1 Worm Gearbox – B5 Flange, IEC 80, 19mm Input
100% ORIGINAL AND QUALITY
12 MONTHS GUARANTEE
- Description
- Description
Output speed at 15:1
At 15:1 the output still runs at a useful pace for belt conveyors, mixers and rollers. Low-ratio worm sets also lose less power as heat than the high ratios.
1400 rpm motor in about 93 rpm Output, 6-pole motor about 64 rpmThese are nominal figures (motor speed / 15); actual speed depends on load.
If 93 rpm is not quite right, for less speed, 20:1 gives about 70 rpm and one step faster is 10:1 (about 140 rpm). Other ratios: 7.5:1, 25:1, 30:1, 40:1, 50:1, 60:1, 80:1.
Will it bolt onto your motor?
Motor side: IEC 80 frame, B5 flange. The adapter is 200 mm across, its bolt circle is 165 mm and the spigot 130 mm; the bore is 19 mm with a 6 mm keyway. If your motor flange matches those three numbers, it will mount directly.
Motors with feet only (B3) need a B5 flange fitted before they can drive the gearbox.
A smaller 11 mm motor shaft can be brought up to 19 mm with our shaft sleeve, as long as the flange also matches.
Other input bores at 15:1: 14 mm (IEC 71), 24 mm (IEC 90).
About the hollow output
The output is a hollow bore of 25 mm. Slide it straight onto your driven shaft with a key, or add a plug-in output shaft if you need a solid shaft to drive a sprocket or pulley (tell us the gearbox size when ordering).
Technical data
Model NMRV063-15-80 Ratio 15:1 Input B5 flange, IEC 80 Input bore 19 mm Hollow output bore 25 mm, 8 mm key Weight without motor approx. 6.2 kgSee the outline dimension sheet in the product photos for mounting-foot and housing dimensions.
Good to know- For hollow-shaft mounting without feet, add the size 63 torque arm to take the reaction load.
- Motor wiring must be done by a licensed electrician.
- Give it a short unloaded test run before the first real job.
Shipping
Sent from our Glen Waverley warehouse to any Australian address, with postage shown at checkout. Warranty terms are in our Returns, Refunds & Warranty Policy.
Have a drawing or a photo of the old gearbox? Send it to hankemotors@gmail.com or call 0401 634 280 and we will match it.
