NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV063 15:1 Worm Reducer B5 14mm Input Shaft Compatible with 71 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV063 15:1 Worm Reducer B5 14mm Input Shaft Compatible with 71 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
Hankemotor

NMRV063 15:1 Worm Gearbox – B5 Flange, IEC 71, 14mm Input

$455.00 In Stock Sold out
Add to wishlist Added to wishlist
Categories: 15:1 Reduction

1-7 DAYS DELIVERY

100% ORIGINAL AND QUALITY

12 MONTHS GUARANTEE

  • Description
NMRV063 15:1 right-angle speed reducer. Divide your motor speed by 15: a 1400 rpm motor gives about 93 rpm, a 960 rpm motor about 64 rpm. Input is a B5 flange for IEC 71 motors (14 mm shaft), 25 mm hollow output. Stocked in Glen Waverley, Victoria.

Output speed and typical uses

At 15:1 the output still runs at a useful pace for belt conveyors, mixers and rollers. Low-ratio worm sets also lose less power as heat than the high ratios.

Output, 4-pole motor about 93 rpm Output, 6-pole motor about 64 rpm

Worked out as motor rpm divided by 15. Loaded motors slip slightly, so expect a touch less than these figures.

If 93 rpm is not quite right, one step slower is 20:1 (about 70 rpm) and for more speed, 10:1 gives about 140 rpm. Also in stock: 7.5:1, 25:1, 30:1, 40:1, 50:1, 60:1, 80:1.

Fitting the motor

Check three numbers on your motor flange: outside diameter 160 mm, bolt circle 130 mm, spigot 110 mm. Those are the IEC 71 B5 figures from the NMRV063 drawing. The shaft goes into a 14 mm bore with a 5 mm key.

A foot-mounted (B3) motor will not bolt on as it is. Fit a matching B5 flange first; we stock B5 and B14 motor flanges by frame size.

A smaller 11 mm motor shaft can be brought up to 14 mm with our shaft sleeve, as long as the flange also matches.

Different motor? This ratio also comes with 19 mm (IEC 80), 24 mm (IEC 90) input.

Want the motor fitted?

Starting from scratch? Look at our geared motors: gearbox and motor supplied together in single phase 240 V and three phase 415 V.

Specifications

Model NMRV063-15-71 Ratio 15:1 Input B5 flange, IEC 71 Input bore 14 mm Hollow output bore 25 mm, 8 mm key Weight without motor approx. 6.2 kg

Housing, foot and output flange dimensions for size 63 are on the drawing in the product images.

Safety and fitting
  • Line up the key and slide the motor shaft into the input bore by hand. Never hammer it in; the shock goes straight into the bearings.
  • Do not rely on the worm to hold a load. For hoists, lifts or anything that could run back under gravity, fit a proper brake.
  • Line up the driven shaft carefully. A bent or misaligned shaft loads the output bearings and shortens their life.

Delivery

We post from Glen Waverley to all states, priced at checkout by postcode. Warranty claims are handled by us directly (Returns, Refunds & Warranty Policy).

Send us your motor nameplate and the output speed you are after: 0401 634 280 or hankemotors@gmail.com. We will confirm the right NMRV063 setup.

RECENTLY VIEWED