NMRV130 10:1 right-angle speed reducer. Divide your motor speed by 10: a 1400 rpm motor gives about 140 rpm, a 960 rpm motor about 96 rpm. Input is a B5 flange for IEC 100 motors (28 mm shaft), 45 mm hollow output. Ships from our Glen Waverley warehouse.
What 10:1 does to your motor speed
10:1 is at the fast end of the worm gearbox range. Typical jobs are bottle and parcel conveyors, rotating brushes and mixing paddles, where you want the speed brought down a few times, not to a crawl.
1400 rpm motor in
about 140 rpm
960 rpm motor in
about 96 rpm
Worked out as motor rpm divided by 10. Loaded motors slip slightly, so expect a touch less than these figures.
If 140 rpm is not quite right, one step slower is 15:1 (about 93 rpm). Also in stock: 20:1, 25:1, 30:1, 40:1, 50:1, 80:1.
Checking it fits your motor
Motor side: IEC 100 frame, B5 flange. The adapter is 250 mm across, its bolt circle is 215 mm and the spigot 180 mm; the bore is 28 mm with an 8 mm keyway. If your motor flange matches those three numbers, it will mount directly.
Motors with feet only (B3) need a B5 flange fitted before they can drive the gearbox.
Other input bores at 10:1: 24 mm (IEC 90), 38 mm (IEC 132).
Gearbox and motor together
If you do not have a motor yet, our motor and worm gearbox sets come matched, so there is no flange or shaft size to check.
Technical data
Model
NMRV130-10-100
Ratio
10:1
Input
B5 flange, IEC 100
Input bore
28 mm
Hollow output bore
45 mm, 14 mm key
Weight without motor
approx. 59 kg
Flange, bore and weight figures come from the NMRV130 dimension sheet in the photos above.
Before you install
- A worm gearbox can resist turning backwards, but it is not a brake. Any lifting or holding job needs a separate brake.
- Bolt the housing down firmly or restrain it, so it cannot rotate when the load starts.
- Guard the output and any chain, belt or coupling so nothing can be caught while it turns.
Delivery and warranty
In stock at Glen Waverley, Victoria, and delivered nationwide. Checkout works out the postage; our Returns, Refunds & Warranty Policy covers claims.
Send us your motor nameplate and the output speed you are after: 0401 634 280 or hankemotors@gmail.com. We will confirm the right NMRV130 setup.