NMRV090 10:1: right-angle drive that slows a motor 10 times. With an IEC 90 B5 motor (24 mm shaft) running at 1400 rpm, you get about 140 rpm on a 35 mm hollow output. Ships from our Glen Waverley warehouse.
Speed you get from a 10:1 ratio
With only 10:1 reduction, most of the motor speed is kept. The worm set runs at its best efficiency here, so it is a good choice for continuous conveyor duty.
With a 4-pole motor (1400 rpm)
about 140 rpm
960 rpm motor in
about 96 rpm
Output speed = motor speed ÷ 10. Motors slow slightly under load, so the real output will be a little lower.
With the same 24 mm input, 15:1 slows it to about 93 rpm and one step faster is 7.5:1 (about 187 rpm). Full range with this input: 20:1, 25:1, 30:1, 40:1, 50:1, 80:1, 100:1.
Checking it fits your motor
The input takes a B5 (large flange) motor in IEC frame 90. On the dimension sheet for this size, the IEC 90 B5 adapter has a 200 mm flange, four bolts on a 165 mm pitch circle and a 130 mm spigot, with a 24 mm bore and 8 mm key. Measure your motor flange against these before ordering.
Have a foot-mount motor? Add a B5 flange for your frame size and it can drive this gearbox.
NMRV090 10:1 is also listed with 19 mm (IEC 80), 28 mm (IEC 100) input.
Want the motor fitted?
If you do not have a motor yet, our motor and worm gearbox sets come matched, so there is no flange or shaft size to check.
Key figures
Model
NMRV090-10-90
Ratio
10:1
Input
B5 flange, IEC 90
Input bore
24 mm
Hollow output bore
35 mm, 10 mm key
Weight without motor
approx. 13 kg
Housing, foot and output flange dimensions for size 90 are on the drawing in the product images.
Safety and fitting
- Do not force the motor shaft in. If it binds, check the key height and clean any burrs off the shaft first.
- Motor wiring must be done by a licensed electrician.
- Guard the output and any chain, belt or coupling so nothing can be caught while it turns.
Delivery and warranty
Australia-wide delivery from our Glen Waverley store; postage appears at checkout. Our Returns, Refunds & Warranty Policy explains warranty and returns.
Want a second opinion before you order? Ring 0401 634 280 or write to hankemotors@gmail.com.