Fulinn BD600 75 kW (100 HP) drive for 415 V three phase, model BD600-075G/093P-4. Heavy duty 75 kW (150 A out) or 93 kW on fans and pumps. 2-year replacement warranty, from Glen Waverley, VIC.
Large plant, controlled properly
Mine and quarry conveyors, large compressors, municipal and irrigation pumps, and big ventilation fans all use motors in this range. A drive cuts the starting current, allows a slow ramp-up for long conveyors, and matches pump and fan speed to demand.
Sizing this drive
G rating: 75 kW
Output current 150 A (input 157 A), with 150%/60 s and 180%/3 s overload.
Conveyors, crushers, compressors, mixers.
P rating: 93 kW
Full-load input 180 A, output 170 A when the load is a fan or pump.
Fans, blowers, centrifugal pumps.
Input
3 phase 415 V
Frequency
0–600 Hz
Housing (W × H × D)
300 × 685 × 323 mm
Control
SVC, VC, V/F
Pick heavy or light duty to suit the load, then check the motor current. Figures are from the BD600 rating and dimension tables.
Installation
- No internal brake unit above 22 kW. Loads that must stop quickly need an external brake unit and resistor; ask us before ordering.
- Supply, cabling, isolation and protection to be designed by a licensed electrician.
- Wall-mounted steel housing; plan cabinet ventilation for the heat load.
Alternatives
Next sizes: 55 kW and 110 kW. All models: BD600 three phase. Documents: BD600 user manual (PDF), C-Tick certificate, ISO 9001 certificate.
Delivery and warranty
Shipped from Glen Waverley, VIC to anywhere in Australia; the cost based on weight and address is shown at checkout. Pick-up by arrangement. 2-year replacement warranty.
Planning a 75 kW install? Send us the motor and load details. Call 0401 634 280 or email hankemotors@gmail.com.