1-7 DAYS DELIVERY
55KW/75HP 113A 415V AC 3 phase variable frequency drive inverter VSD VFD Lathe
100% ORIGINAL AND QUALITY
12 MONTHS GUARANTEE
- Description
- Description
Picking the rating that applies to you
In the BD600 rating table this size is model BD600-055G/075P-4. The G (general) rating is for loads that need full torque at any speed. The P rating is for fans and pumps, where the load drops off quickly as speed falls.
Heavy duty (G): 55 kW Rated input 113 A, rated output 110 A. Overload 150% for 60 s, 180% for 3 s. Conveyors, crushers, mixers, extruders, hoists, compressors, large lathes and mills. Light duty (P): 75 kW Rated input 157 A, rated output 150 A. Overload 120% for 60 s, 150% for 3 s. Centrifugal fans, extraction fans, blowers, centrifugal and circulating pumps.Size the drive by the motor's full-load current on the nameplate as well as its kW. The motor current must stay at or below the output current of the rating you are using.
Main specifications
Supply 3 phase 415 V, 50/60 Hz Output 3 phase 0–415 V, 0–600 Hz Control modes SVC, VC (with PG card), V/F Speed range 1:100 SVC, 1:1000 VC Communication RS485 Protection IP20Functions that matter at this size
- Soft starting. Ramps a large motor up gradually instead of hitting the supply with a direct-on-line start current.
- PID control. Holds a pressure, flow or level from a sensor signal. On fans and pumps, running slower when demand is low cuts power use.
- Ride-through and speed tracking. Keeps running through a brief power dip, and can pick up a motor that is still spinning.
- Common DC bus. Several BD600 drives can share a DC bus on multi-drive lines.
- Two motor parameter sets. Switch one drive between two motors, one at a time.
- BD600 drives above 22 kW have no internal brake unit. If the load must stop quickly or overhauls the motor, you need an external brake unit and resistor. Ask us before ordering.
- Supply cabling, protection and earthing must be designed and installed by a licensed electrician, using the drive's rated input current.
- The drive is IP20. Install it in a ventilated cabinet or switch room with ambient temperature from −10 °C to +40 °C.
Documents
Download the BD600 user manual (PDF), the C-Tick certificate and the ISO 9001 certificate. Email us if you need the dimension drawing for your cabinet layout.
Delivery and warranty
We ship from Glen Waverley, VIC to anywhere in Australia. The cost to your address, based on size and weight, appears at checkout. Pick-up from Glen Waverley can be arranged if you call first. Warranty is 2 years replacement, handled directly by us.
Need a different size? See the BD600 range, including the 75 kW and 37 kW models, or call 0401 634 280 / email hankemotors@gmail.com with your motor nameplate.RELATED PRODUCTS
$1,183.93
$1,301.40
$2,300.93
$2,529.30

