NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV040 15:1 Worm Reducer B5 9mm Input Shaft Compatible with 56 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV040 15:1 Worm Reducer B5 9mm Input Shaft Compatible with 56 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
Hankemotor

NMRV040 15:1 Worm Gearbox – B5 Flange, IEC 56, 9mm Input

$270.00 In Stock Sold out
Add to wishlist Added to wishlist
Categories: 15:1 Reduction

1-7 DAYS DELIVERY

100% ORIGINAL AND QUALITY

12 MONTHS GUARANTEE

  • Description
NMRV040 worm drive with a 15:1 ratio and a B5 input for IEC frame 56 motors. The input bore is 9 mm, the hollow output 18 mm, and the output speed is about 93 rpm from a 4-pole motor. In stock at Glen Waverley, VIC.

Speed you get from a 15:1 ratio

Low reduction (15:1) is mainly about turning the drive through 90 degrees and taking the edge off the motor speed. Think packing-line conveyors, tumblers and rotating screens.

Output, 4-pole motor about 93 rpm With a 6-pole motor (960 rpm) about 64 rpm

Calculated from nominal motor speed; allow a few percent less under full load.

With the same 9 mm input, one step slower is 20:1 (about 70 rpm) and 10:1 speeds it up to about 140 rpm. Also in stock: 25:1, 30:1, 40:1.

Fitting the motor

IEC 56 B5 is the interface here. The input flange measures 120 mm with bolts on a 100 mm circle and a 80 mm locating spigot. A 9 mm motor shaft with a 3 mm key slides into the bore.

Motors with feet only (B3) need a B5 flange fitted before they can drive the gearbox.

Other input bores at 15:1: 11 mm (IEC 63), 14 mm (IEC 71).

How to pick a ratio

Start from the speed your machine needs at the shaft. If that is around 93 rpm and your motor is a standard 4-pole, 15:1 is the ratio. If it is slower, step up to a higher ratio or a 6-pole motor.

Specifications

Model NMRV040-15-56 Ratio 15:1 Input B5 flange, IEC 56 Input bore 9 mm Hollow output bore 18 mm, 6 mm key Weight without motor approx. 2.3 kg

Full dimensions are on the drawing among the product photos.

Installation notes
  • A worm gearbox can resist turning backwards, but it is not a brake. Any lifting or holding job needs a separate brake.
  • Run it for a short time without load first and listen for knocking or grinding before putting it to work.
  • Guard the output and any chain, belt or coupling so nothing can be caught while it turns.

Delivery

Ships Australia-wide from Glen Waverley, VIC; postage is calculated at checkout. Warranty and returns: see our Returns, Refunds & Warranty Policy.

Questions about torque or fitting? Call 0401 634 280 or email hankemotors@gmail.com.

RECENTLY VIEWED