1-7 DAYS DELIVERY
NMRV040 15:1 Worm Reducer B5 11mm Input Shaft, IEC 63 Frame
100% ORIGINAL AND QUALITY
12 MONTHS GUARANTEE
- Description
- Description
Output speed and typical uses
With only 15:1 reduction, most of the motor speed is kept. The worm set runs at its best efficiency here, so it is a good choice for continuous conveyor duty.
Output, 4-pole motor about 93 rpm Output, 6-pole motor about 64 rpmThese are nominal figures (motor speed / 15); actual speed depends on load.
With the same 11 mm input, for less speed, 20:1 gives about 70 rpm and 10:1 speeds it up to about 140 rpm. Full range with this input: 25:1, 30:1, 40:1, 50:1, 60:1, 80:1, 100:1.
Checking it fits your motor
Before buying, hold a tape to your motor flange. For IEC 63 B5 you should see about 140 mm overall, a 115 mm bolt circle and a 95 mm spigot. The gearbox bore suits an 11 mm shaft with a 4 mm key.
Have a foot-mount motor? Add a B5 flange for your frame size and it can drive this gearbox.
Other input bores at 15:1: 9 mm (IEC 56), 14 mm (IEC 71).
Output shaft options
There is no solid shaft sticking out: the load shaft goes through the 18 mm hollow output and is driven by a key. For a protruding shaft, order the output shaft as well and quote the size.
Gearbox data
Model NMRV040-15-63 Ratio 15:1 Input B5 flange, IEC 63 Input bore 11 mm Hollow output bore 18 mm, 6 mm key Weight without motor approx. 2.3 kgFull dimensions are on the drawing among the product photos.
Before you install- Motor wiring must be done by a licensed electrician.
- Line up the driven shaft carefully. A bent or misaligned shaft loads the output bearings and shortens their life.
- Run it for a short time without load first and listen for knocking or grinding before putting it to work.
Shipping
Australia-wide delivery from our Glen Waverley store; postage appears at checkout. Our Returns, Refunds & Warranty Policy explains warranty and returns.
Want a second opinion before you order? Ring 0401 634 280 or write to hankemotors@gmail.com.
