12 L hydraulic power unit, 240 V single phase, aluminium pump: 2.2 kW (3 HP) 2800 rpm motor with dual capacitors, 3.2 cc/rev pump, 20 MPa maximum, vertical mounting.
Power pack for two-post car hoists
Most two-post and scissor vehicle hoists use a 12 L power pack like this one. The motor drives the pump, which lifts the hoist through its relief and check valves. It runs from a standard 240 V supply, which suits home garages and small workshops without three phase.
Specifications
Motor
2.2 kW / 3 HP, 2800 rpm
Supply
240 V single phase, 50 Hz
Pump displacement
3.2 cc/rev
Max pressure
20 MPa
Tank
12 L steel
Oil port
G3/8
Mounting
Vertical
Pump body
Aluminium
Supplied with suction filter, return pipe and air breather. Relief valve and check valve fitted.
Installation
- Fill with clean hydraulic oil of the grade your hoist maker specifies.
- Have the motor connected by a licensed electrician on a suitably rated 240 V circuit.
- Bleed the system and test the hoist unloaded before lifting a vehicle.
Three phase version: aluminium pump, 415 V. Dispatched from Glen Waverley, VIC. Postage is calculated at checkout. Ask us about warranty terms.
Questions? 0401 634 280 · hankemotors@gmail.com