Quincy QPR17 compressed air dryer, 1.7 m³/min (60 CFM). Dew point 3–10 °C, inlet up to 50 °C, single phase 230 V.
Who it suits
The QPR17 is often paired with an 11 kW compressor in panel shops, joineries and small manufacturing sites.
Dry air matters most for CNC machines: water in the air line corrodes spindle seals and valve spools, and the repair costs far more than a dryer.
Short on floor space? The QPR15 (1.5 m³/min) and QPR21 (2.1 m³/min) sit either side of the QPR17 in capacity and use a lower cabinet only 370 mm wide.
Specs
Electrical supply
230 V / 1 ph / 50 Hz
Treats up to
1.7 m³/min
Cabinet
550 × 600 × 958 mm
Shipping weight
75 kg
Line pressure
0.7–1.3 MPa
Dew point achieved
3–10 °C
Hottest inlet air
50 °C
Hottest room
35 °C
Refrigerant type
R134a
Real capacity drops as inlet and room temperatures rise.
At 1.7 m³/min it suits compressors delivering a little less than that. Good matches from our stock include the 7.5 kW NVPMT 10, 7.5 kW GLF8-8 and 11 kW GLF11-8.
- Clean the condenser fins every few months in a dusty shop.
- Check the automatic drain discharges during the first week of use.
More models: refrigerated dryers. We dispatch from Glen Waverley, VIC and deliver Australia-wide; freight is worked out at checkout from your address. Warranty terms are available on request.
Need a dryer for an 11 kW compressor? hankemotors@gmail.com or 0401 634 280.