QPR15 from Quincy's QPR range: dries 1.5 m³/min (53 CFM) of compressed air in a cabinet only 370 mm wide. 230 V, R134a.
Why this size
Narrow enough to slot between a receiver and a wall, the QPR15 is a tidy way to add dry air to an existing compressor corner.
Spray painters notice the difference first: no more water spitting from the gun on humid mornings, and fewer fish-eye defects in the finish.
Planning to add tools later? The QPR21 is built in the same 370 mm-wide cabinet and treats 2.1 m³/min (75 CFM), so it drops into the same spot when demand grows.
Key figures
Pressure range
0.7–1.3 MPa
Capacity
1.5 m³/min
Dew point
3–10 °C
Inlet temperature limit
50 °C
Room temperature limit
35 °C
Gas
R134a
Supply
230 V / 1 ph / 50 Hz
L × W × H
550 × 370 × 704 mm
Net weight
60 kg
Figures from the product data. Allow a margin for hot weather.
Match it to free air delivery, up to 1.5 m³/min here. Compressors we sell that it suits: the 7.5 kW NVPMT 10 and 7.5 kW GLF8-8.
- Position it downstream of the receiver so it gets cooler air.
- Fit isolating valves either side for servicing.
Compare all sizes in the dryer collection. It ships from Glen Waverley, VIC to anywhere in Australia, with freight calculated at checkout. Contact us for warranty details.
Ask us whether the QPR15 suits your setup: 0401 634 280 · hankemotors@gmail.com.