500 L horizontal air receiver: 14 bar maximum working pressure, tested to 21 bar, designed to EN 286-1. The tank lies flat on a welded base and is 710 mm high, so it fits under a bench or a mezzanine. Shipped from Glen Waverley, VIC.
Why choose a horizontal tank
A vertical tank uses less floor area. A horizontal one uses less height and sits low, so it is more stable. Choose horizontal when:
Ceiling height is limited
At 710 mm high, it fits in plant rooms and under shelving, where a 2 m vertical tank won't.
You want equipment on top
The shell has welded mounting pads on top (see photos). Send us the footprint of your pump, motor or dryer and we will check it fits.
You need a large buffer
500 L of stored air smooths out big, short demands such as blasting, tyre work or several tools starting at once.
Design specification
Volume
500 L
Max working pressure
14 bar
Test pressure
21 bar
Design temperature
10 °C to 100 °C
L × W × H
1860 × 760 × 710 mm
Shell diameter
600 mm
Empty weight
190 kg
Standard
EN 286-1:1998
Figures are from the design drawing in the product photos. Corrosion allowance 0.5 mm. Hazard level B.
Connections
All ports are female Rc (taper) threads:
- Air inlet and air outlet: Rc1
- Drain: Rc1/2 (underneath)
- Safety valve: Rc1/2
- Pressure gauge: Rc1/4
- Two inspection openings: Rc2, one at each end
Installation notes
- Keep the compressor's cut-out pressure below 14 bar, and fit a safety valve set no higher than that to the Rc1/2 port.
- Set the tank on a level floor and fix the base, so pipe connections are not carrying any load.
- The drain sits at the lowest point. Open it daily or fit an automatic condensate drain.
- Plan for periodic pressure vessel inspection as required by your state's WHS regulator.
Short on space? The 360 L horizontal receiver is the same design, 1660 mm long. To dry the air after the tank, see our refrigerated air dryers.
Freight
Sent from our Glen Waverley warehouse to any Australian address. Freight on a 190 kg tank is quoted at checkout once you enter your delivery address.
Want to check this tank against your compressor first? Call 0401 634 280 or email hankemotors@gmail.com.
Where it is used
Typical applications are low compressor rooms and skid-mounted air systems where a tall vertical tank will not fit.
Smaller in the same low format: the 360 L horizontal receiver. Vertical option: 500 L vertical.
Ask us about warranty terms.