Fulinn BD600 200 kW (267 HP) drive for 415 V three phase, model BD600-200G/220P-4. Rated output 380 A heavy duty, 430 A light duty (220 kW). 2-year replacement warranty, from Glen Waverley, VIC.
Heavy industrial drives
For 200 kW motors on large compressors, mills, crushers, pumping stations and fans. A direct-on-line start at this size puts a heavy surge on the supply; the drive ramps the motor up instead and adds speed control.
Heavy duty or light duty
G rating: 200 kW
Full-load input 385 A, output 380 A; overload 150% one minute, 180% three seconds.
Mills, crushers, compressors.
P rating: 220 kW
430 A in, 430 A out for fan and pump duty.
Pumping stations, fans.
Mains
3 phase 415 V
Frequency span
0–600 Hz
Dimensions (mm)
420 × 840 × 334 mm
Control
SVC, VC, V/F
Always check full-load amps on the motor plate against these ratings. Figures are from the BD600 rating and dimension tables.
Planning
- No internal brake unit above 22 kW. Loads that must stop quickly need an external brake unit and resistor; ask us before ordering.
- A licensed electrician must design the installation.
- Allow for heat dissipation and access around the housing.
Related drives
Next sizes: 160 kW and 220 kW. Manual: BD600 user manual (PDF).
Warranty and delivery
Shipped from Glen Waverley, VIC; delivery to your address is priced at checkout. Pick-up by arrangement. 2-year replacement warranty.
Need a freight quote or the drawing? Ask us. Call 0401 634 280 or email hankemotors@gmail.com.