NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV050 15:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV050 15:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
Hankemotor

NMRV050 15:1 Worm Gearbox – B5 Flange, IEC 63, 11mm Input

$368.30 In Stock Sold out
Add to wishlist Added to wishlist
Categories: 15:1 Reduction

1-7 DAYS DELIVERY

100% ORIGINAL AND QUALITY

12 MONTHS GUARANTEE

  • Description
15:1 worm gear reducer, NMRV050, for flange-mounting an 11 mm shaft IEC 63 motor. Expect around 93 rpm at the output with a standard 1400 rpm motor and a 25 mm hollow bore to fit your driven shaft. Ships from our Glen Waverley warehouse.

Is 15:1 the right ratio?

Choose a low ratio such as 15:1 when the driven machine still needs to turn at a fair rate: roller tables, small conveyors, fans driven through a right angle, or a paddle in a tank.

1400 rpm motor in about 93 rpm With a 6-pole motor (960 rpm) about 64 rpm

Worked out as motor rpm divided by 15. Loaded motors slip slightly, so expect a touch less than these figures.

If 93 rpm is not quite right, 20:1 slows it to about 70 rpm and one step faster is 10:1 (about 140 rpm). Other ratios: 7.5:1, 25:1, 30:1, 40:1, 50:1, 60:1.

Fitting the motor

The input takes a B5 (large flange) motor in IEC frame 63. On the dimension sheet for this size, the IEC 63 B5 adapter has a 140 mm flange, four bolts on a 115 mm pitch circle and a 95 mm spigot, with a 11 mm bore and 4 mm key. Measure your motor flange against these before ordering.

Motors with feet only (B3) need a B5 flange fitted before they can drive the gearbox.

NMRV050 15:1 is also listed with 14 mm (IEC 71), 19 mm (IEC 80) input.

Fine-tuning the speed

If 93 rpm is close but not exact, run a three-phase motor on a VFD. Lowering the frequency slows the output smoothly without changing gearboxes.

Technical data

Model NMRV050-15-63 Ratio 15:1 Input B5 flange, IEC 63 Input bore 11 mm Hollow output bore 25 mm, 8 mm key Weight without motor approx. 3.5 kg

See the outline dimension sheet in the product photos for mounting-foot and housing dimensions.

Installation notes
  • Do not force the motor shaft in. If it binds, check the key height and clean any burrs off the shaft first.
  • A worm gearbox can resist turning backwards, but it is not a brake. Any lifting or holding job needs a separate brake.
  • Run it for a short time without load first and listen for knocking or grinding before putting it to work.

Shipping and warranty

Dispatched from Glen Waverley, VIC. Enter your address at checkout for postage. Returns and warranty follow our Returns, Refunds & Warranty Policy.

Have a drawing or a photo of the old gearbox? Send it to hankemotors@gmail.com or call 0401 634 280 and we will match it.

RECENTLY VIEWED