NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 15:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 15:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
NMRV030 30:1 Worm Reducer B5 11mm Input Shaft Compatible with 63 Frame Motors - Hankemotor - AU
Hankemotor

NMRV030 15:1 Worm Gearbox – B5 Flange, IEC 63, 11mm Input

$208.20 In Stock Sold out
Add to wishlist Added to wishlist
Categories: 15:1 Reduction

1-7 DAYS DELIVERY

100% ORIGINAL AND QUALITY

12 MONTHS GUARANTEE

  • Description
Size 30 worm gearbox, 15:1. It bolts onto an IEC 63 B5 flange motor with an 11 mm shaft and brings 1400 rpm down to about 93 rpm at the 14 mm hollow output. In stock at Glen Waverley, VIC.

Output speed and typical uses

15:1 is at the fast end of the worm gearbox range. Typical jobs are bottle and parcel conveyors, rotating brushes and mixing paddles, where you want the speed brought down a few times, not to a crawl.

With a 4-pole motor (1400 rpm) about 93 rpm With a 6-pole motor (960 rpm) about 64 rpm

Output speed = motor speed ÷ 15. Motors slow slightly under load, so the real output will be a little lower.

Close alternatives on NMRV030: one step slower is 20:1 (about 70 rpm) and for more speed, 10:1 gives about 140 rpm. Full range with this input: 25:1, 30:1, 40:1, 50:1.

Motor fit

Before buying, hold a tape to your motor flange. For IEC 63 B5 you should see about 140 mm overall, a 115 mm bolt circle and a 95 mm spigot. The gearbox bore suits an 11 mm shaft with a 4 mm key.

Motors with feet only (B3) need a B5 flange fitted before they can drive the gearbox.

Other input bores at 15:1: 9 mm (IEC 56).

Fine-tuning the speed

Pair this gearbox with a three-phase motor and a 240 V input VFD to dial the output speed in. Running the motor well below its rated speed for long periods reduces its own cooling, so keep that in mind on continuous duty.

Technical data

Model NMRV030-15-63 Ratio 15:1 Input B5 flange, IEC 63 Input bore 11 mm Hollow output bore 14 mm, 5 mm key Weight without motor approx. 1.2 kg

Flange, bore and weight figures come from the NMRV030 dimension sheet in the photos above.

Fitting tips
  • A worm gearbox can resist turning backwards, but it is not a brake. Any lifting or holding job needs a separate brake.
  • Have a licensed electrician connect the motor.
  • Keep the load shaft square to the gearbox; misalignment wears the output seals and bearings.

Delivery and warranty

Ships Australia-wide from Glen Waverley, VIC; postage is calculated at checkout. Warranty and returns: see our Returns, Refunds & Warranty Policy.

Want a second opinion before you order? Ring 0401 634 280 or write to hankemotors@gmail.com.

RECENTLY VIEWED