LC-980/13 vertical receiver: our largest stocked tank. 980 L, 13.8 bar design pressure, 800 mm shell and 2,170 mm tall. Weight 265 kg. Built for plants running larger screw compressors or several machines on one line. Dispatched from Glen Waverley, VIC.
When you need close to a cubic metre of air
Large receivers earn their place on sites where demand jumps around: a shift starting, a blast pot opening, several CNC machines blowing off at once. With close to 1,000 L stored, these peaks come out of the tank and the compressor doesn't have to chase them. The listing pairs this tank with 11–22 kW screw compressors, which suits machines such as the 15 kW GLF15-8 or the 22 kW L-30PM. A screw compressor also stays loaded longer and unloads less often, so it uses less power for the same air.
If you run two compressors, one big receiver also gives them a common point to share the load.
Specifications
Model
LC-980/13
Volume
980 L
Design pressure
13.8 bar
Temperature
5 °C to 100 °C
Shell
DN800 × 1500 mm, 6 mm
Footprint · height
800 × 800 · 2170 mm
Weight
265 kg
Hazard level
B
Shell and temperature figures are from the registration notice and drawing in the photos. Design standard GB150-2011.
Handling and installation
At 265 kg and over 2 m tall, the tank needs a forklift or crane to move and stand up. Never lift it by its pipe connections. Bolt all three legs to a concrete slab, protect it with a relief valve set no higher than 13.8 bar, and keep the drain accessible for daily use.
Ongoing care
A tank this size collects a lot of condensate, so an automatic drain is worth fitting. Check the shell and welds for corrosion at each compressor service, and book pressure vessel inspections as your state's WHS rules require.
Related equipment
Smaller sites may get by with the LC-500/13. To supply the tank, see our rotary screw compressors. To dry the air afterwards, see our refrigerated dryers.
Delivery
Freighted from Glen Waverley, VIC. Because of its size, the delivery cost depends heavily on location and is calculated at checcalculated at checkout. Ask us about warranty terms.
Need a larger receiver or a higher pressure rating? Call 0401 634 280 or email hankemotors@gmail.com.