Quincy QPR40 refrigerated dryer for 4.0 m³/min (142 CFM) of air, using R410a refrigerant, on a 230 V single phase supply.
Good to know
At 4.0 m³/min, the QPR40 can dry the output of a 22 kW screw compressor, or two smaller machines feeding one main.
It is the only model in our Quincy range that uses R410a. If you service your own refrigeration equipment, note this before ordering parts.
Specifications
Outlet dew point
3–10 °C
Dryer capacity
4.0 m³/min
Pressure
0.7–1.3 MPa
Power required
230 V / 1 ph / 50 Hz
Max air in
50 °C
Max surroundings
35 °C
Refrigerant
R410a
Weight
75 kg
Footprint
520 × 500 × 809 mm
Data from the product listing. Leave headroom in summer.
Rule of thumb: dryer capacity should meet or beat compressor output. Here that is 4.0 m³/min. From our compressor range, consider the 15 kW GLF15-8, 22 kW L-30PM and 22 kW GLF22-8. Neighbouring sizes: the QPR21 at 2.1 m³/min below it, and the QPR66 at 6.6 m³/min above.
- Allow access to the front panel for the controller and drain.
- Use pipework at least as large as the dryer's ports.
More models: refrigerated dryers. Freight from Glen Waverley shows at checkout. Ask us about warranty terms.
Planning a 22 kW air system? hankemotors@gmail.com · 0401 634 280