14 mm bore, 70 mm OD single-groove pulley in cast iron for A-section V-belts.
Will it fit your motor?
Bore size is 14 mm. Measure your shaft with calipers; it should read 14 mm. On IEC motors, a 14 mm shaft usually means frame 71. It is held by two grub screws as well as the key.
About this pulley
A single-groove pulley runs one belt, which suits light to moderate loads. Cast iron is the traditional choice for motor pulleys: stiff, durable and well balanced.
Speed ratio between two pulleys follows their pitch diameters. With this 70 mm pulley as the driver, a larger driven pulley slows the machine and a smaller one speeds it up.
Need a different diameter for a 14 mm shaft? Try 50 mm single, 70 mm double.
Dimensions
Shaft bore
14 mm
Diameter
70 mm
Grooves
1 (single)
Made from
Cast iron
Suits belts
A-section V-belt
Fitting notes
- Switch off and lock out the power first.
- Check pulley alignment with a straight edge across both faces.
- Re-check belt tension after the first few hours of running.
- Always guard the belt drive.
Shipping
We post from Glen Waverley to all states, priced at checkout by postcode. Warranty claims are handled by us directly (Returns, Refunds & Warranty Policy).
Call 0401 634 280 or email hankemotors@gmail.com and we will help match a pulley to your motor.